全氟烃基季铵盐的微波合成
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ423.4

基金项目:

国家自然科学基金项目;广东省教育部产学研结合项目


Microwave synthesis of a perfluoroalkyl-containing quaternary ammonium salt
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以全氟己基乙基碘和N-甲基二乙醇胺(MDEA)为原料,通过微波绿色合成技术制备了全氟烃基季铵盐表面活性剂。通过傅里叶红外光谱、质谱和核磁共振氟谱对产物的结构进行表征。通过单因素实验探讨了溶剂用量、微波功率、反应物摩尔比和反应时间对MDEA转化率的影响。采用三因素三水平的响应面分析法,通过建立N-甲基二乙醇胺的转化率与各因素之间的Central-Composite数学模型,对其合成工艺进行优化。全氟烃基季铵盐表面活性剂的最佳合成工艺条件为0.015mol全氟己基乙基碘、0.01molMDEA、溶剂用量为50wt%(10ml)、反应时间2.5h、微波功率582.49W,在该条件下MDEA转化率达到89.15%,所需时间仅为传统加热法的10.42%。

    Abstract:

    A novel perfluoroalkyl-containing quaternary ammonium salt was synthesized from N-methyl diethanolamine and perfluorinated hexyl ethyl iodide by microwave technique. The structure of the product was characterized by fourier transform infrared spectroscopy, mass spectrometry and nuclear magnetic resonance spectrum. The effect of solvent dosage, microwave power, reactant mole ratio and reaction time on reaction conversion rate were studied. The Central-Composite mathematical relational model between conversion rate of N-methyl diethanolamine and effect factors was established to optimize the synthesis technique of the product. The optimum synthesis conditions were as follow: perfluorinated hexyl ethyl iodide 0.015mol, N-methyl diethanolamine 0.01mol, solvent dosage 50wt%(10ml), microwave power 582.49 W, reaction time 2.5 h. Under the optimal condition, in a short reaction time, only 10.42% of the conventional heating time, the conversion rate of MDEA was 89.15%.

    参考文献
    相似文献
    引证文献
引用本文

徐运欢,郑成.全氟烃基季铵盐的微波合成[J].精细化工,2014,31(3):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-09-30
  • 最后修改日期:2013-12-13
  • 录用日期:2013-12-16
  • 在线发布日期: 2014-02-13
  • 出版日期:
文章二维码